To set up your WIFI, you will need to use your remote. Using the arrow keys press down and then right until you highlight the settings tab. Then press ok.

Using the arrow keys again, highlight WIFI and press ok.

Make sure the WIFI is now turned on.


Than select your WIFI network.

Congratulations on your RBox purchase!

You are on your way to free entertainment on your TV.

Now enter your WIFI password, select connect with your courser, left mouse click, ok or tap the touchpad and you are ready to go.

Go back to your home screen,  Select OOKLA and press OK.

Connect one end of the HDMI cable to one of your televisions HDMI inputs.

Once in KODI, Your main menu will appear similar to below.  Wait about 15 minutes after your first time opening KODI to allow any updates to download.

Don't forget to install two AAA batteries in the remote. (not included)

After you have waited about 15 minutes, You are ready to begin your new world of TV entaertainment.

First you will want to open the box.

Connect the other end of the HDMI cable to the RBox.

Make sure you remove the plastic protective caps from both ends of the HDMI cable.

Use the mouse courser to select begin test.

Next, remove the RBox and the plastic packing.

Now connect the power cord to a surge supressed outlet.  Then plug the adapter in to the RBox.


Turn on your television and make sure the input is selected for the HDMI port you are using.


Now press the power button for the RBox.


Once the software initialization is complete.

You will see the following screen.

Now you can see the remote and cables that were underneath.

Remove the Remote control, HDMI cable and your power cord.

Your internet speed should be 15mbps or better for best operation. Now go back to your home screen and select KODI, then press ok.

On the standard remote. Press the mouse button. Then use the arrow keys to move the courser on to the yellow begin test button. Click the left mouse button to begin.